|
|
|
|
|
|
Industrial Injection PhatShaft 62 for the Dodge Cummins 12 Valve 1994 to 1998
|
Our Price: $1,395.00
|
|
|
The PhatShaft 62 is the perfect upgrade turbo for towing. The PhatShaft 62 for the 12 valve comes with the 12cm housing matched with a 65mm turbine. We suggest a 12 cm turbine housing if the truck has moderate fueling upgrades such as 300hp injectors and a camplate. If the truck has heavier fueling upgrades such as 370hp injectors, aggressive camplate and governor springs then you will be better suited with 14cm housing. The benefit of the 14cm exhaust housing is lower Exhaust Gas Temperatures but it will be slower to spool in daily driving situations. The wategate is set at 40psi to prevent head gasket failure. The PhatShaft 62 compliments moderate fueling upgrades and can support 300 - 550hp. The 62 is a drop in replacement however, a HX40 downpipe is required for instalation
Note:
The HX40 downpipe and clamp are required for installation
|
|
|
|
|
|
|
|
|
|
|
|
|
Industrial Injection Silver Bullet 66 2nd Gen
|
|
Our Price: $2,050.00
|
|
|
Silver Bullet for the Dodge Cummins 24 Valve 1994 to 2002. The Silver Bullet is our latest effort to achieve perfection. Much like the Super PhatShaft 66 it was designed to handle multiple fueling upgrades and comes equipped with an extended tip 66mm compressor wheel. What separates the Silver Bullet from the Super PhatShaft 66 is our new technology 74mm turbine wheel. The new trim design transfers exhaust gas energy more efficiently than any other turbine on the market. It also allows for better exhaust gas expulsion which results in lower EGt’s and quicker rotor acceleration. The most important benefit of the 74 mm turbine wheel is that it gets rid of turbo surge and broadens the power band range. Another identifying characteristic of the Silver bullet is the polished compressor housing. The Silver Bullet uses a 14 cm exhaust housing in which we modify the angle of the exhaust nozzle, maximize the wastegate ports, and enlarge the wastegate chamber for full wastegate travel. Like all PhatShaft turbochargers it is equipped with dual grooved high performance bearings and an adjustable boost elbow The Sliver Bullet can support over 800hp and is the best all-round turbo on the market today. NOTE: Turbo comes with all install components; however,
*the HX40 downpipe and clamp are required for installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Industrial Injection Silver 64 for the 2nd Gen Cummins 1994 - 2002
|
|
Our Price: $2,050.00
|
|
|
The Silver 64 is our latest effort to achieve perfection. Much like the Super PhatShaft 64 it was designed to handle multiple fueling upgrades and comes equipped with an extended tip 64mm compressor wheel. What separates the Silver 64 from the Super PhatShaft 64 is our new technology 74mm turbine wheel. The new trim design transfers exhaust gas energy more efficiently than any other turbine on the market. It also allows for better exhaust gas expulsion which results in lower EGt’s and quicker rotor acceleration. The most important benefit of the 74 mm turbine wheel is that it gets rid of turbo surge and broadens the power band range.Another identifying characteristic of the Silver 64 is the polished compressor housing. The Silver 64 uses a 14 cm exhaust housing in which we modify the angle of the exhaust nozzle, maximize the wastegate ports, and enlarge the wastegate chamber for full wastegate travel. Like all PhatShaft turbochargers it is equipped with dual grooved high performance bearings and an adjustable boost elbow The Sliver 64 can support up to 700hp.*the HX40 downpipe and clamp are required for installation.
*The HX40 downpipe and clamp are required for installation*the HX40 downpipe and clamp are required for installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Industrial Injection Silver 62 for the 2nd Gen Cummins 1994 - 2002
|
|
Our Price: $2,050.00
|
|
|
The Silver 62 is our latest effort to achieve perfection. Much like the Super Phat Shaft 62 it was designed to handle multiple fueling upgrades and comes equipped with an extended tip 62mm compressor wheel. What separates the Silver 62 from the Super Phat Shaft 62 is our new technology 74mm turbine wheel. The identifying characteristic of the Silver 62 is the polished compressor housing. The Silver 62 uses a 14 cm exhaust housing in which we modify the angle of the exhaust nozzle, maximize the wastegate ports and enlarge the wastegate chamber for full wastegate travel. Like all Phat Shaft turbochargers it is equipped with dual grooved high performance bearings and an adjustable boost elbow The Sliver 62 can support up to 650hp and is the best all-round turbo on the market today
the HX40 downpipe and clamp are required for installation.
*The HX40 downpipe and clamp are required for installation*the HX40 downpipe and clamp are required for installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Industrial Injection Super PhatShaft 66 for 2nd Gen trucks 1994 to 2002
|
|
Our Price: $1,695.00
|
|
|
The Super PhatShaft 66 was designed for trucks that have multiple fueling upgrades. This was our first high performance PhatShaft and was the first turbocharger on the market to utilize the 71mm exhaust wheel. It features a 66mm extended top compressor wheel but what makes the Super Phat Shaft 66 special is the 71mm exducer exhaust wheel and modified exhaust housing. The wastegate has custom dual oversized passages and a wastegate spacer plate for maximum effiency. Like all Phat Shaft turbochargers it is equipped with dual grooved bearings and an adjustable boost elbow. The Super PhatShaft 66 can support up to 750hp.
*The HX40 downpipe and clamp are required for installation
|
|
|
|
|
|
|
|
|
|
|
|
|
Industrial Injection Super PhatShaft 64 for 2nd Gen. Trucks 1994 to 2002
|
|
Our Price: $1,695.00
|
|
|
The Super PhatShaft 64 was designed for trucks that have multiple fueling upgrades. The 64 was built for trucks that are on the bubble between towing and racing. It features a 64mm extended top compressor wheel but what makes the Super PhatShaft 64 special is the 71mm exducer exhaust wheel and modified exhaust housing. The wastegate has custom dual oversized passages and a wastegate spacer plate for maximum effiency. Like all PhatShaft turbochargers it is equipped with dual grooved bearings and an adjustable boost elbow. The Super PhatShaft 66 can support up to 750hp.
*The HX40 downpipe and clamp are required for installation
|
|
|
|
|
|
|
|
|
|
|
|
|
Industrial Injection Super PhatShaft 62 for 2nd Gen. trucks 1994 to 2002
|
|
Our Price: $1,695.00
|
|
|
The Super Phat Shaft 62 was designed for trucks that have multiple fueling upgrades used to tow large loads. This turbo is recommended for all-round performance. It features a 62mm extended top compressor wheel but what makes the Super Phat Shaft 62 special is the 71mm exducer exhaust wheel and modified exhaust housing. The wastegate has custom dual oversized passages and a wastegate spacer plate for maximum effiency. Like all Phat Shaft turbochargers it is equipped with dual grooved bearings and an adjustable boost elbow. The Super Phat Shaft 62 can support up to 600hp.
*The HX40 downpipe and clamp are required for installation
|
|
|
|
|
|
|
|
|
|
|
|
|
Industrial Injection Compound Phat Shaft Towing Turbochargers
|
Our Price: $5,100.00
Sale Price: $5,000.00
You Save $100.00
|
|
|
PHAT SHAFT TOWING COMPOUNDS 62/K31 2ND GEN DODGE 350-700 HP.
Compound Phat Shaft towing turbos are built with a Phat Shaft 62 as the primary charger with the K31 as the secondary charger. Both primary and secondary turbochargers on the towing compounds are wastegated for ultimate control of boost and back pressure. This unique combination offers quick spool up and unmatched towing capabilities.
Note: Kit comes with all hardware for installation. An ATS 3-piece manifold is required for installation and is NOT included in the kit.
|
|
|
|
|
|
|
